Cleaning a concrete or paved driveway with a pressure washer.

The driveway is the first thing people see when they pull up to your home. It’s also the most frequently used area of your property, so it needs to be cleaned regularly. Keep your driveway looking its best with these tips on how to clean a concrete or paved driveway:

Inspect the driveway.

• Inspect before you start pressure cleaning your driveway, it’s important to get an idea of what your driveway looks like and how damaged it is. Look for cracks or other damage, oil stains, weeds growing in the driveway, loose stones or anything that may cause you problems when painting or resealing.

• Get rid of moss and dirt from cracks. Moss and dirt can prevent sealers from properly adhering to concrete surfaces; cleaning them with a high pressure washer will help ensure your driveway surface is clean and free of dirt stains and debris.

Use a high pressure washer for concrete driveways.

• Use a pressure washer specifically designed for cleaning concrete and paver driveways. A high-pressure washer set at the right pressures will do the best job, but you can also use a lower-pressure model if you want to save some money and time. If you decide to use a low pressure washer remember to use stronger chemicals and scrub the stains with a good brush. Also use the correct PPE for the chemical.

• Use soap, detergent or the right chemical degreaser for difficult stains . If you want your driveway to look clean and shiny, then you’ll need to use soap or detergent when using your pressure washer. This will help the water remove any dirt, much more effectively than if it were used alone without any cleaning agents added into the mix.

• Use the correct spray nozzle attachment on your hose rather than spraying directly from the end the hose onto your driveway’s surface area (over time this can damage the surface). For best results, try using an adjustable nozzle, so that you can control how much pressure gets pumped out onto each area being cleaned up!

Scrub stubborn stains on your concrete or paved driveway

If you have stubborn stains, use a stiff brush to scrub them away.

If your driveway is particularly dirty and needs a deep clean, consider using a pressure washer (high or low) to remove stubborn stains.

Pressure washing can be effective for cleaning driveways because it’s able to remove grease and oil as well as dirt. If you don’t own a pressure washer, consider renting one from your local hardware store or home improvement center or use a professional pressure washing service like Sutherland Shire driveway pressure washing service to get the job done quickly and efficiently.

To prevent dirt from building up on your driveway again, use a degreaser or bleach to remove stains before they set in.

Seal the driveway.

There are numerous driveway sealers available, but they all have one thing in common: they’ll protect your asphalt and make it last longer. The easiest way to go about this is by applying a coat of sealer every couple of years. This can be done either by using a garden sprayer or purchasing an aerosol product specifically for sealing driveways (which gives you better control over where you’re putting the sealant). Many people find that doing maintenance on the driveway twice a year can help prevent cracking during the colder months. If you live somewhere with especially harsh winters, you may need to seal the driveway more often. This is worth keeping in mind when figuring out how much time and money you want to spend on upkeep!

Check this video out  and see the results first hand.

Conclusion

The answer to the question “How do I clean my driveway?” is simple: use these steps to remove stains and dirt from your driveway so that it looks its best before sealing.